斯罗曼型钢堆垛机,在西德和国外轧钢车间已运用多年,实际表明,效果良好。它用来精确堆垛扁钢、角钢、槽钢、工字钢。一般说来,一台高生产率的轧机,设有两台堆垛机即可。现将中小型型钢堆垛机操作顺序概述如下(以堆垛角钢为例,加以说明):1.处于原始位置的辊子台架4,第一批角钢料进入堆垛机,放下提升磁铁2,如图1所示。 Schroeder bar stackers, which have been used for many years in rolling mills in West Germany and abroad, have shown to be effective. It is used to accurately stack flat, angle, channel, I-beam. In general, a high-productivity mill with two palletizers can be used. Now small and medium-sized steel stacker operation sequence is summarized as follows (stack angle, for example, to illustrate): 1 in the original position of the roller stand 4, the first batch of angle material into the stacker, lower lifting magnet 2, As shown in Figure 1.