Synthesis and Characterization of CdO-SnO2 Nanocomposites Prepared by Hydrothermal Method

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:chenzeqian
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this work,(1-x)CdO-xSnO2 nanocomposites (≤ 0.15) have been synthesized via hydrothermal route.The structural study reveals that CdO nanostructures possess crystalline phase and cubic structure.The CdO-SnO2 nanocomposites possess both cubic and orthorhombic structure with good crystallinity.The crystallite size in the nanocomposites was found to be in the range of 9.6-19.6 nm.Field emission scanning electronic microscopy and highresolution tunnelling microscopy analysis confirm the presence of both cubic and orthorhombic structures which is also confirmed from X-ray diffraction studies.Fourier transform infrared spectroscopy (FTIR) studies confirm that CdO-SnO2 nanocomposites possess the characteristics band of both CdO and SnO2 nanostructures.The UV-visible absorption studies confirm that the optical absorption band in CdO-SnO2 nanocomposites possesses both blue and red shift as compared to that of CdO nanostructures.Photoluminescence spectroscopy studies reveal the appearance of strong emission peak at 513,469 and 369 nm corresponding to green,blue and violet emission spectrum,respectively,in CdO-SnO2 nanocomposites.The FTIR studies confirm the presence of hydroxyl and water functional group due to atmospheric water vapours and chemical bonding in CdO and CdO-SnO2 nanocomposites.Raman spectroscopy confirms the presence of Raman bands of both CdO and SnO2 phases in the CdO-SnO2 nanocomposites.
其他文献
In this study,series of nanolayered structures of Zn-Al LDHs were prepared by urea hydrolysis.Nanofibers and nanonets of the Al-doped ZnO were formed via the decomposition of the nanolayers under high pressure and temperature.Nanospheres were also prepare
A356-carbon nanofibers (CNFs) composites with different contents of CNFs were fabricated by ultrasonic vibration casting to investigate the effect of CNFs in the matrix on the mechanical properties and wear resistance.The worn surfaces were investigated u
In this work,the influence of pulse current parameters on springback and bending force of magnesium alloy during electropulse-assisted (EPA) V-bending was investigated.The experimental results showed that pulse current can effectively reduce the springbac
The unique phase transformation and carbide evolution in 9Cr18 steel were investigated during semi-solid forming and subsequent heat treatment.The functional gradient thixoforging 9Cr18 component was divided into inner area and edge area.Microstructure ev
This study examines the relationship among cooling rate,microstructure and mechanical properties of a sand-casted A1-5.0Mg--0.6Mn-0.25Ce (wt%) alloy subjected to T4 heat treatment (430 ℃ × 12 h + natural aging for 5 days),and the tested alloys with wall t
In this study,Al matrix nanocomposites containing 1,2 and 4 wt% nano-boron nitride were fabricated by mechanical milling and hot extrusion.The mechanical properties of all extruded samples were evaluated.Also,the morphology and microstructure of the mille
The GH4169 superalloy with different content of δ-Ni3Nb phase was welded by tungsten inert gas welding.A detailed study of microstructure and hardness of heat-affected zone (HAZ) was performed in both as-welded and aged state.The results show that the pre
Experiments were carried out to investigate the corrosion behavior of epoxy-coated rebar (ECR) with pinhole defect (diameter in hundreds of microns) immersed in the uncarbonated/carbonated simulated pore solution (SPS) of seawater concrete.Corrosion behav
By using a novel surface modification technique named ultrasonic-electropulsing coupling rolling (UECR) process on an A1-Si casting alloy rod,the surface of material was smoothened significantly.Meanwhile,a strengthened layer with a gradient change in har
This paper reports TiC-(Ni-Cr) metal ceramic alloy (ratio of components 50∶50) with nanoscaled components formed in the surface layer and smoothly transformed into the initial inner structure throughout the material under pulsed electron irradiation of th