Self-Healing Concrete with Crystalline Admixture—A Review

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:csharpguy2
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The scope of the present paper is to understand the effects of crystalline admixture on the self-healing capacity of the cementitious composites. Previous studies were examined and a conclusion was drawn to the effect that different additives to crystalline admixture tend to improve self-healing of concrete for larger cracks. It is recommended that initial treatment with chemical admixture can stimulate and heal further cracks and it has the better repeatability trend in mixing with the concretes and mechanical recovery is possible even under repetitive preloading. Effective self- healing with chemical admixtures even under open-air exposure, leads to study the importance of a service ability design parameter including the maximum allowable crack width by repeatability analysis as a function of the exposure with the concept of sealable crack width.
其他文献
In order to study the effect of electromagnetic compound treatment on the mechanical property, cutting performance and microstructure of cemented carbide, the samples were treated by a self-made electromagnetic compound treatment device with different mag
Based on an advanced technology, randomly-aligned subwavelength structures (SWSs) were obtained by a metal-nanodot-induced one-step self-masking reactive-ion-etching process on a fused silica surface. Metal-fluoride (mainly ferrous-fluoride) nanodots indu
To explore the complex thermal-mechanical-chemical behavior in the solid-liquid cast-roll bonding (SLCRB) of Cu/Al cladding strip,numerical simulations were conducted from both macro and micro scales.In macro-scale,with birth and death element method,a th
An electro-deposition method has been recently proposed to repair cracked reinforced concrete. To evaluate the corrosion resistance of the reinforcing steel in cracked concrete, three different parameters including type of auxiliary electrode, electrode d
Cement pastes containing 0%, 15%, 25% and 35% fly ash were prepared. After being cured for 90 days, all fly ash blended cement pastes were crushed and ground into powders with a particle size less than 80 μm and then the powders were immersed in alkali so
V-Cr-Al-O nanospheres were successfully synthesized using V2O5, Al(OH)3, CrO3, and H2C2O4·H2O as the starting materials by a facile one-pot hydrothermal approach. Several techniques containing X-ray powder diffraction, hydrogen temperature programmed redu
Eu3+ ion doped cubic Na5Lu9F32 single crystals with high quality were synthesized by a modified Bridgman method by using a high 70-90 ℃/cm temperature gradient for cross solid-liquid interface.The optical spectroscopic investigations of the obtained singl
Five kinds of mortars with density grades of 500, 600, 700, 800, and 900 kg/m3 were prepared. Their thermal conductivity and compressive strength were measured, and the morphological changes before and after simulated tunnel fire were observed. To investi
Influence mechanism of sulfide ions (S2-) during manganese electrodeposition from sulphate electrolyte was investigated. Under the experimental conditions, S2- ion concentration and electrolyte pH represented significant multiple effects on the cathode cu
The viscoplasticity and compressive strength of cement with high erosion performance were studied. The influences of curing temperature and content of ground granulated blast furnace slag (GGBFS) on these performances of the medium heat cement (including