【摘 要】
：
Through the comparison of calcination conditions between cement preclinkering technology and cement precalcining technology, we studied the characteristics of temperature ifeld distribution of cement preclinkering technology systems including cyclone preh
【机 构】
：
Country State Key Laboratory of Green Building Materials, China Building Materials Academy, Beijing
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
Through the comparison of calcination conditions between cement preclinkering technology and cement precalcining technology, we studied the characteristics of temperature ifeld distribution of cement preclinkering technology systems including cyclone preheater, preclinkering furnace, and rotary kiln. We used numerical simulation method to obtain data of temperature ifeld distribution.Some results are found by system study. The ratio of tail coal of cement preclinkering technology is about 70%, and raw meal temperature can reach 1070℃. ShorterL/D kiln type of preclinkering technology can obtain more stable calcining zone temperature. The highest solid temperature of cement preclinkering technology is higher than 80℃, and high temperature region (>1450℃) length is 2 times, which is beneifcial for calcining clinker and higher clinker quality. So cement preclinkering technology can obtain more performance temperature ifled, which improves both the solid-phase reaction and liquid-phase reaction.
其他文献
The performances of the cement-based materials can be improved by the incorporation of polypropylene fiber, but the damage processes become more complex with different fiber contents at the same time. The acoustic emission (AE) technology can achieve the
Based on the similarity theory, a new experimental method named Similar Experimental Method for Durability of Concrete (SEMDC) was established. The existing experimental methods for durability of concrete were summarized, and the merits and demerits of th
Titanium phosphonate adsorbent materials with hierarchically porous structure were fabricated using the hydrolysis of tetrabutyl titanate in different organophosphonic acids solutions. Based on the macroporous structure of 100-2000 nm in size, a worm-hole
An efficient,practical,highly selective and environmentally benign method is reported for the synthesis of aryl thioethers via the coupling of thiols with aryl boronic acids in the presence of NaOH and a catalytic amount of CuSO4 at 130 ℃ using water as a
SiC/Gr/ZL101 aluminum-based composites were prepared by semi-solid stirring and gravity pouring method. The effects of SiC/Gr with different volume fractions on the microstructure and property of aluminum-based composites were studied by means of microstr
SiCp/Cu composites with a compact microstructure were successfully fabricated by vacuum hot-pressing method. In order to suppress the detrimental interfacial reactions and ameliorate the interfacial bonding between copper and silicon carbide, molybdenum c
The nanostructure of cementitious materials has important effects on concrete properties.The effects of rice husk ash (RHA) on cement hydration product phases and interfacial transition zone (ITZ) in mortar were investigated from the nano-scale structure
Crack potential and hydration processes of the cement pastes were monitored using an up-to-date eccentric steel cracking frame (ESCF), associated with the non-contact electrical resistivity apparatus, independently. The objective of employing the ESCF is
Thermodynamic stability,microvoid distribution and phases transformation of natural pozzolana opal shale (POS) were studied systematically in this work.XRD analysis showed that opal-CT,including microcrystal cristobalite and tridymite,is a major component
The properties ofAl/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2-WC-ZrO2 composite anode for zinc electrowinning were investigated.The electrochemical performance was studied by Tafel polarization curves (Tafel),electrochemical impedance spectroscopy (EIS)