油罐氟蛋白空气泡沫液下喷射灭火装置安装完毕后,需要根据灭火对象(油罐)所具备的现有条件,来制定其相应的系统运行参数,以保证有效、可靠地扑灭油罐火灾。现阶段,确定运行参数,主要通过对系统的冷试试验来进行。由于冷试试验需要涉及试验、测试操作人员及其技术素质,测试仪器仪表和工具,试验经费以及油罐区的安全等较多的实际问题,因而初次试验时,往往带有一定程度的盲目性,难得一次性成功,造成一些不必要的浪费。为此,油库工作人员希望在力求运行参数准确、可靠、适用的前题下,尽可能简化试验方法,减少试验次数,缩短试验 After installation of the fluorine fluoride air foam liquid foam injection fire extinguishing equipment, the corresponding system operating parameters need to be set according to the existing conditions of the object to be extinguished (oil tank) to ensure that the oil tank fire is extinguished effectively and reliably. At this stage, to determine the operating parameters, mainly through the cold test system to carry out. Since the cold test involves more practical problems involving testing, testing of operators and their technical qualities, testing instrumentation and tools, testing expenses, and safety of the tank farm, initial testing often involves some degree of blindness , A rare one-time success, resulting in some unnecessary waste. To this end, oil depot staff hope that the operating parameters of the pursuit of accurate, reliable, applicable to the former title, to simplify the test method as much as possible to reduce the number of tests and shorten the test